Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Forks & Suspension

$24.99
30mm stanchion wiper Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Compatible with 30mm stanchion tube forks Sold in pairs
$34.99
Compatible with 32mm stanchion forks Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Designed with dual lip seal for less contamination Automotive grade oil ring for maximum lubrication
$34.99
35mm stanchion wiper Compatible with 35mm stanchion tube forks Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Designed with dual lip seal for less contamination Automotive grade oil ring for maximum lubrication
$52.99 - $149.99
The feel of riding and durability are two decisive factors when designing seals for forks in motorcycles and bicycles. Especially in off-road applications, such as enduro or motocross, the requirements on the sealing are very demanding. SKF has developed a range of seals with this in mind. Solutions are available for both off-road and on highway use. For motorcycles, the seals come in pairs with a separate oil seal and dirt wiper seal tuned to each other to give low friction for the best riding experience, as well as long life. For bicycles the two seals can be combined into a single unit. Features An oil seal and a wiper seal to minimize contamination reaching the oil seal. Specially developed NBR elastomer with lower friction characteristics. Wiper seal with optional dual lip design for high contamination situations. New oil seal lip geometry specific to fork seals. Benefits Increased life and performance Enhanced water and dirt protection capability Reduced and constant friction over the life of seal Much improved ride comfort Compatibility with a wide range of OE and aftermarket oils Reduced wear and air suction
$89.99
Keep your pivots running smooth with a replacement bushing kit. COMPATIBILITY - Element Alloy 2011 - Element Alloy 2012 - Element Alloy 2013 - Element Carbon 2011 - Element Carbon 2012 - Element Carbon 2013
$84.90
Maintenance kit for: Element RSL 2011-2012 and Element 29" 95MM 2011-2016 Thunderbolt Alloy (w/o Ride-9) 2014 - 2015 Sherpa 2016
$109.99
Bearing kit for : Slayer 2017-2019
$250.00
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"
$704.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
$544.00 - $640.00 $640.00 Up to 15% Off
First, we took the proven damping performance of our popular Monarch series and introduced it to a new metric-sized chassis. Increased bushing overlap, a new bushing design, and a new scraper seal decreased friction and increased durability. Now we’ve changed the interior surface to improve lubrication and accelerate piston movement – further friction reductions that keep the tires firmly planted on the ground. The result is truly Deluxe. - Native metric design - Simple, effective air volume tuning system - 3-position compression adjustment (Open/Pedal/Lock) - External Rebound adjustment
$22.99 - $63.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$546.00 - $595.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
$1,228.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$849.15 $999.00 15% Off
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
$1,612.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,330.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$1,535.00
- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$9.00
RockShox Rear Shock Eyelet Bushing 1/2" x 1/2" Sold as pairs
$1,204.00
The new Rudy is a perfect match for your gravel bike. It's energy-efficient for straightaways and offers enough travel to keep you comfortably in control when things get rough. Featuring all-new 30mm upper tubes built around the Charger Race Day damper (our lightest damper ever) and our proven SoloAir spring. Rudy offers precise steering, full or short fender compatibility, and the looks to make your road bike proud. Everything designed with the needs of gravel riders in mind. - Purpose-built and laser-focused on gravel and e-gravel bikes - 30mm upper tubes are light and look the part - 30mm and 40mm travel options - Charger Race Day damper tuned for gravel needs with rock-solid lockout and a full range of rebound adjust - Solo Air spring perfectly tuned for shorter travel and efficiency over bumps - Short fender compatibility with a 3-bolt system - Full fender compatibility with custom stealth stay bosses - Lightweight machined and anodized crown offers a premium and durable finish - Maxima Plush damping fluid reduces friction and silences damper noise - Up to 700x50 tire clearance - Available in new Kwiqsand Signature colorway or Gloss Black - E-bike approved
$731.85 - $771.80 $861.00 - $908.00 15% Off
Designed for the latest hard-hitting enduro and trail bikes, the Super Deluxe Ultimate shock features the ride tuning abilities of an air spring with both compression and rebound adjustment to fine-tune to any trail. With a solid threshold adjustment for pedaling performance and Maxima Plush fluid for a buttery smooth feel, riders can now easily dial in a podium-worthy ride. - Highly tunable DebonAir spring offers a coil-like consistent feel throughout the travel - Separate and independent open and threshold pistons tuned exactly for your ride - Low-Speed Compression adjustment allowing fine-tuning of compression needs from the base tune - Maxima Plush damping fluid reduces friction and silences damper noise
$872.00
- RC2T damper is only found at the Ultimate level and features externally adjustable, truly independent High and Low Speed Compression along with an increased range of rebound adjustment. - Riders can fine-tune damping from the factory base tune for a more personalized feel while factoring in ride style and terrain.
$1,689.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$824.99 $1,099.99 25% Off
Our twin-tube damping technology in a compact, single-can package designed for more linear suspension systems A high performing and robust air-sprung shock, the TTX1Air offers the same exceptional trail smoothing capabilities as our double-can TTX2Air, but comes in a slimmer and lighter, single-can size. Designed for trail bikes and eMTBs with more linear suspension systems, the TTX1Air is a versatile choice for riders looking for a lighter or more compact shock that offers outstanding performance along with the highest level of tuning options. The TTX1Air delivers the unrivalled sensitivity, control and flawless all-conditions damping that TTX products have built their reputation on. Initial set-up of the TTX1Air shock is really easy to do – check out the video here. Once complete, you’ll immediately appreciate the super-plush feel that increases comfort over long, demanding rides and maintains your momentum over roots and rocks – allowing you to stay completely in tune with your bike. The TTX1Air’s superb levels of confidence inspiring traction and control will encourage you to push your bike harder than ever before. The compact design makes the TTX1Air 60-80 grams lighter than the TTX2Air, while a new slim-fit end-eye means that it’s compatible with a wider number of frame designs. We’ve also increased the maximum air pressure capacity to handle a larger range of riders and the additional demands of e-MTB bikes. The TTX1Air combines the superior damping function of our TTX system together with a low friction air-spring. The twin-tubed design enables two-way oil flow through the piston and the double tubes. With the ability to extensively tune the pressure when the oil passes the compression and rebound valves, we have created a well-balanced and extremely predictable damper. This results in a highly effective range of clicks enabling you to easily dial-in the shock and achieve the perfect suspension set-up. The TTX1Air upgrades an already proven package of damping performance. The metric system design has also allowed us to increase the bushing overlap, making it more robust and improving side load protection. Our wiper seal and air sleeve lubrication technology minimises friction and delivers outstanding performance that resists fading between service intervals. Just like every product fitted with TTX damping technology, the TTX1Air has a race-proven settings bank giving access to a huge range of options for tuning the damper to suit any specific rider, bike or riding style.
$60.00
ARI/Ariete fork seals quality of execution is matched only by the unique nature of the material used--the carboxylated elastomer known as XNBR. This graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant. ARI oil seals have been designed with a variety of lip profiles to make them longer lasting, while reducing friction to a minimum. Because a separating lubricant between the fork tube and the oil seal can reduce friction and increase wear life, ARI includes a packet of ARISIL with each seal kit. This is lube formulated as a rubber/metal lubricant for mechanical components used in the NASA space program.
$60.00
ARI/Ariete fork seals quality of execution is matched only by the unique nature of the material used--the carboxylated elastomer known as XNBR. This graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant. ARI oil seals have been designed with a variety of lip profiles to make them longer lasting, while reducing friction to a minimum. Because a separating lubricant between the fork tube and the oil seal can reduce friction and increase wear life, ARI includes a packet of ARISIL with each seal kit. This is lube formulated as a rubber/metal lubricant for mechanical components used in the NASA space program.
$619.00
The Bomber Air - offered in a huge range of sizes, with a large volume offset shock reservoir - trail ready, DH rated, easy-to-use, bomber as ever. Features - Asymmetric reservoir position for improved compression lever ergonomics and versatile frame fitment - Air valve location offers improved frame clearance and pump access - Easy to adjust for all rider weights and riding styles - DH-rated shock pairs well with all Marzocchi forks, from DJ to Z2 to 58 - 2-position, non-indexed compression sweep adjust means you can set it and forget it - Innovative tunable sweep to adjust the stop to a narrower window - Comes in metric and trunnion configurations - Compatible with FOX bearing mounts on both ends (excluding trunnion) - Has travel reducing spacers like most modern shocks - Unique air volume spacers, available in 0.1 C.I. increments
$979.00
A return to the roots of dirt jumping, the Bomber DJ shares the same stiff 36mm chassis as the Z1 with a dedicated 26” wheel configuration. Featuring a 20x110mm axle (with optional conversion kit for 15 x 100mm hubs), this no-fuss, 100mm-travel weapon is built for long practice days at the pump track and podium-placing slopestyle runs. Features - Limited Edition colorway - Short crown height for flicking that front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle
$979.00
We designed the Bomber Z1 for riders ready to get rowdy. Silky smooth travel with the traction and stiffness where it matters. It’s not about counting seconds or fiddling with settings at the top of the enduro course. It’s pointing your bike down the line with the confidence that your suspension has your back. Bikes are fun. And so is the Bomber Z1. Features - Limited Edition colorway - Stout and proven 36mm chassis - Intuitive compression sweep adjustment, from locked out to full open - Simple rebound adjustment for the set-and-forget rider - GRIP damper AVAILABLE COLORS: Gloss White TRAVEL: 170mm WHEEL: 29" RAKE: 44mm AXLE: 15QRx110 DAMPING: GRIP SPRING: FLOAT STANCHIONS: 36mm Black Anodizing STEERER: Tapered Aluminum
$989.00
The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun. - 36mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QR x 110mm Boost axle - FIT GRIP damper with adjustable compression and rebound - FLOAT EVOL air spring
$1,049.00
Riders asked for it, Marzocchi heard the call and proudly delivered a coil mountain bike fork worthy of its legendary predecessor. The Z1 Coil builds on the strong legacy of the original Bomber Z1 from the ‘90s that helped fuel the freeride movement. Weight weenies need not apply. Features - Limited Edition colorway - Stout and proven 36mm chassis - GRIP damper - Ultra-lightweight tempered silicon-chromium steel spring, wrapped for near-silent performance - Integrated air assist for progressivity and bottom out control - External preload adjuster - Adjustable travel in 10mm increments with included internal spacers
Page 1 of 5 Next page