Forks & Suspension

Riders have been asking for it, Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single crown fork that started the revolution way back in the ‘90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near-silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. ***Note the Z1 Coil comes with a medium coil installed. Different configurations must be purchased separately.***

The Original Bomber Z2 brought forth a revolution in riding. Twenty Year later the return of the Z2 brings the same DNA with its ready to shred plush and smooth. The from the ground up Rail Damper is a simple to adjust from locket out to fully open. Add Ease to the Steaze with the Z2.

The Original Bomber Z2 brought forth a revolution in riding. Twenty Year later the return of the Z2 brings the same DNA with its ready to shred plush and smooth. The from the ground up Rail Damper is a simple to adjust from locket out to fully open. Add Ease to the Steaze with the Z2. AVAILABLE COLORS - LTD White TRAVEL; 100mm, 120mm, 130mm (29"only), 140mm, 150mm (27.5" only) WHEEL: 27.5", 29" RAKE: 44mm, 51mm (29"only) AXLE: 15QRx110 DAMPING: RAIL SPRING: FLOAT STANCHIONS: Ø34mm Black Anodizing STEERER: Tapered Aluminum

Mastodon is a real-world trail suspension for fat bikes. This fat bike fork delivers all-temperature performance, working equally well in winter or summer, soaking up chatter and big hits. Extended ride height versions fit up to 26×5.15” / 27.5×4.5” tires. Standard ride height versions fit up to 26×4” / 27.5×3.8” tires on the snow, or taking on shimmering hot sand like a pro. All-temperature performance is born of frigid winter ride-testing. 34mm trail chassis is stiffer and steers more precisely than any other fat bike suspension fork. - 100mm (Adjustable down to 80mm) or 120mm (Adjustable up to 140mm) Travel - Expert Air Spring - Absolute+ Compression Damping - TPC Rebound Damping - Extended platform accommodates 26" tires up to 5.15" and 27.5" tires up to 4.5" wide, and is optimized for frames that are designed around taller ride heights - Flawless performance down to 0 degrees Fahrenheit (-15 deg C) - VTT compression damper offers three positions: open, firm, and locked out - 15x150mm tooled Hexlock axle - 34mm aluminum stanchions provide stiffness and stability

34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvments

FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping

Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C

We all lose those little parts now and then, protect the air spring and make your bike look new Replacement alloy Valve cap from Fox for Fox Float 32 and Fox Float 34 forks.

Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2019 Fox 36 in Factory, Performance - Elite

Light Cable guide for Fox forks.

FLOAT DPX2 Rebuild Seal Kit

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression. For 1/2" Shaft models only, Not compatible with other models of Shock. Please confirm your Shock Model and Compatibility with Fox Racing suspension. WILL NOT FIT 2021 and Newer FLOAT X Shocks

Need to replace or upgrade your Damper assembly. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. ADJUSTMENTS High-speed compression (w/VVC) 8 clicks Low-speed compression 16 clicks High-speed rebound (w/VVC) 8 clicks Low-speed rebound 16 clicks

Need to replace or upgrade your Damper assembly. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. ADJUSTMENTS High-speed compression (w/VVC) 8 clicks Low-speed compression 16 clicks High-speed rebound (w/VVC) 8 clicks Low-speed rebound 16 clicks

For 2013 or newer Float Shocks, 9mm Shaft Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression.

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel volume spacers are a great way to customize the performance of your bike.

We all lose those little parts now and then. Replacement alloy Valve cap from Fox for all rear shocks.

COIL PERFORMANCE FOR THE TRAIL AND BEYOND Answering the prayers of riders seeking the ultimate in plush suspension, the new DHX brings coil-sprung, magic-carpet, trail-smoothing performance in a wide range of configurations to the trails and beyond. ADJUSTMENTS - Independent 2 Position Open/Firm Lever - Low Speed Rebound – 16 Clicks - Low Speed Compression – 11 Clicks - Coil spring preload - (new detents on spring collar) SPECS & FAMILY FEATURES - ALL-NEW chassis and damper - High-flow main piston - Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – 2 position adjuster - Optimized reservoir lengths per shock size - Hydraulic top out feature - Reduced damper noise - MCU bottom out bumper - Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access) - Spring preload collar with detents and max / min number of clicks and direction arrow - Full diameter spring retainer with wire ring (like DHX2) - Spring scuff guard on body (like DHX2) ALL FACTORY DHX SHOCKS - Shaft Coating Chromoly - Ultra-low friction, highly durable damper shaft finish - VVC Rebound Yes - Detents on spring collar Yes

READY TO RACE STRAIGHT OUT OF THE GATE Featuring an entirely new chassis and damper, delivering enhanced tunability, smoother performance, and more progressivity than ever before. DOES NOT INCLUDE SPRING ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) - High-speed compression - 8 clicks - Low-speed compression - 16 clicks - High-speed rebound (w/VVC) - 8 clicks - Low-speed rebound - 16 clicks - Coil spring preload - (new detents on spring collar) SPECS & FAMILY FEATURES - NEW chassis & damper - NEW detents on spring collar to prevent loosening under light preload conditions - NEW high-flow main piston - NEW MCU bumper for increased end stroke progression and bottom out control - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW improved high-speed rebound tunability via the addition of VVC (Variable Valve Control) - NEW improved bearing ratio for metric sizes - NEW graphics - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Increased control and decreased harshness via linear damping - Steel outer body and finned inner body for improved structural rigidity and reduced hysteresis - Independent firm mode circuit – firmer lockout than previous DHX2 - Reduced friction - Reduced length reservoir for a better fit on more frames

HEAVYWEIGHT FEATURES IN A LIGHTWEIGHT PACKAGE Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity. ADJUSTMENTS - Independent 2 Position Open/Firm Lever - Low Speed Rebound – 16 Clicks - Low Speed Compression – 11 Clicks SPECS & FAMILY FEATURES - ALL-NEW chassis and damper - High-flow main piston - Air seal package - Volume spacers with smaller increments - MCU bottom out bumper - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – Clockable 2 position adjuster Increased rebound adjuster range (over DPX2) - Optimized reservoir lengths per shock size - Hydraulic top out feature - Reduced damper noise - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2 - Bearing hardware compatible both sides - Air valve location offers improved frame fitment and pump access

Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house. ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) -High-speed compression - 8 clicks -Low-speed compression - 16 clicks -High-speed rebound (w/VVC) - 8 clicks -Low-speed rebound - 16 clicks SPECS & FAMILY FEATURES - NEW chassis & damper - NEW high-flow main piston - NEW progressive bottom-out bumper - NEW lower friction air seals - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW graphics - Improved bearing ratio for metric sizes - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Updated compression ratios, 300psi max - Improved high-speed rebound tunability via addition of VVC (Variable Valve Control) I- ncreased control and decreased harshness via linear damping Ultra-low-friction, highly durable damper shaft finish - Independent firm mode circuit – firmer lockout than previous FLOAT X2 - Finned inner body for improved structural rigidity and reduced hysteresis These models not available with 2 position switch. TRUNNION | 225 x 75 STANDARD | 250 x 75 -

Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house. ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) -High-speed compression - 8 clicks -Low-speed compression - 16 clicks -High-speed rebound (w/VVC) - 8 clicks -Low-speed rebound - 16 clicks - NEW chassis & damper - NEW high-flow main piston - NEW progressive bottom-out bumper - NEW lower friction air seals - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW graphics - Improved bearing ratio for metric sizes - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Updated compression ratios, 300psi max - Improved high-speed rebound tunability via addition of VVC (Variable Valve Control) I- ncreased control and decreased harshness via linear damping Ultra-low-friction, highly durable damper shaft finish - Independent firm mode circuit – firmer lockout than previous FLOAT X2 - Finned inner body for improved structural rigidity and reduced hysteresis

THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. 34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.

THE DOWN-COUNTRY TRAILBLAZER The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class-leading tunability, chassis stiffness, and strength. 34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. In its fourth generation, our patented FIT4 closed cartridge system provides two on-the-fly compression damping positions—Open and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With all-new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. 36 FACTORY GRIP2 FORKS Upper Tube Finish: Kashima Coat Air Channels: Yes Bleeders: Yes Axle Size: 15QR x 110 Floating Axle: Yes Rotor Size: 180 direct Post Mount, Up to 230 compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment Air Spring: FLOAT EVOL Steerer: 1.5 Taper Starting Weight: 1965 g

The Hard-Hitting Long travel Enduro specialist optimized for Electric Bicycles, SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With an all-new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favorite and made it even better. “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.