Rear Shock Parts

RockShox Rear Shock Eyelet Bushing 1/2" x 1/2" Sold as pairs

FLOAT DPX2 Rebuild Seal Kit

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression. For 1/2" Shaft models only, Not compatible with other models of Shock. Please confirm your Shock Model and Compatibility with Fox Racing suspension. WILL NOT FIT 2021 and Newer FLOAT X Shocks

For 2013 or newer Float Shocks, 9mm Shaft Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression.

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel volume spacers are a great way to customize the performance of your bike.

We all lose those little parts now and then. Replacement alloy Valve cap from Fox for all rear shocks.

Replacement Fox IGUS eyelet bushings for one eyelet. Measures .598OD,.501ID,

Freshen up your Fox shock. It is a fairly simple service that can greatly improve the performance of an old Fox shock and bring it back to life. This kit includes everything you will need for the service. Fox Float rebuild kit for all Fox Float shocks from 2000 until current model shocks. Includes 2 quad rings Includes 2 O-rings Includes dust wiper Includes travel indicator O-ring Includes 4 back up rings

These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimized by using a smaller wire diameter and fewer coils, creating a lighter spring. For 2019 FOX has developed a new line of SLS springs to optimize performance on all coil shock platforms including the newer metric and trunnion options. All 2019 SLS springs are Orange and are marked with their spring rate in lbs/in and the total travel of the spring itself in both standard and metric. 2019 SLS springs should only be paired with shocks having less travel than the travel marked on the spring itself. 2.4in/61mm Travel Springs - 7.875inx2.25in, 185mm(T)x50mm, 185mm(T)x52.5mm, 185mm(T)x55mm, 210mmx50mm, 210mmx52.5mm, 210mmx55mm, 230mmx57.5mm 2.65in/67mm Travel Springs - 8.50inx2.50in, 205mm(T)x60mm, 205mm(T)x62.5mm, 205mm(T)x65mm, 230mmx60mm, 230mmx62.5mm, 230mmx65mm 2.9in/74mm Travel Springs - 8.75inx2.75in, 225mm(T)x70mm, 250mmx70mm 3.15in/80mm Travel Springs - 9.50inx3.00in, 225mm(T)x72.5mm, 225mm(T)x75mm, 250mmx72.5mm, 250mmx75mm 3.65in/93mm Travel Springs - 10.5inx3.5in For all Spring Calculations please go to the link below - https://www.ridefox.com/fox17/help.php?m=bike&id=918 WARNING: Modification or alteration of a FOX product can cause product failure resulting in SEVERE INJURY OR DEATH. Never modify or alter ANY part of a FOX product (including coil springs, lower leg cross brace, crown, steerer, upper tubes, lower leg, air can, seat post, air volume spacers, internals, axle slit shims, axle adapters, or any other parts).

These are shock bearings for Fox suspension. Specifications: Inside Diameter: 0.5" Length: 0.5" Shaft: 0.498"

All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Compatible with both Fox and Marzocchi rear shocks The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks

Volume Spacer tuning kits for FOX rear suspension service and repair. for 2022+ model year