Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Fork Parts & Oil

$25.99
Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's new integrated fender. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.
$52.99 - $149.99
The feel of riding and durability are two decisive factors when designing seals for forks in motorcycles and bicycles. Especially in off-road applications, such as enduro or motocross, the requirements on the sealing are very demanding. SKF has developed a range of seals with this in mind. Solutions are available for both off-road and on highway use. For motorcycles, the seals come in pairs with a separate oil seal and dirt wiper seal tuned to each other to give low friction for the best riding experience, as well as long life. For bicycles the two seals can be combined into a single unit. Features An oil seal and a wiper seal to minimize contamination reaching the oil seal. Specially developed NBR elastomer with lower friction characteristics. Wiper seal with optional dual lip design for high contamination situations. New oil seal lip geometry specific to fork seals. Benefits Increased life and performance Enhanced water and dirt protection capability Reduced and constant friction over the life of seal Much improved ride comfort Compatibility with a wide range of OE and aftermarket oils Reduced wear and air suction
$502.00
Need to replace or upgrade your Damper assembly. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. ADJUSTMENTS High-speed compression (w/VVC) 8 clicks Low-speed compression 16 clicks High-speed rebound (w/VVC) 8 clicks Low-speed rebound 16 clicks
$78.99 - $81.00
Replacement Quick Release Axle assembly, for Fox forks. Two options available 2016 15x100 QR 2016 15x110 QR
$45.99 - $81.00
Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2019 to 2021 Fox 34 Non-Stepcast forks in Factory, Performance - Elite
$2.59 - $5.99
Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style.
$19.79 - $45.99
If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.
$19.79 - $32.99
FOX is now offering decal kits in 11 custom colorways. Kits include fork and shock decals to fit almost every FOX fork and shock model. Specific decals for 32, 34, 36, 38 and 40 forks as well as DPS, FLOAT X, FLOAT X2, DHX and DHX2 shocks. One decal kit can cover more than one fork and shock combo. Images to be added later
$34.99
35mm stanchion wiper Compatible with 35mm stanchion tube forks Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Designed with dual lip seal for less contamination Automotive grade oil ring for maximum lubrication
$88.00
Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2019 to 2022 Fox 34 Stepcast forks in Factory, Performance - Elite
$58.99
The lightweight Kabolt Axle, inspired by Geoff Kabush through the RAD program, is now available for all Fox 15QR forks. The 100mm version is 40g lighter than the standard 15QR (54% weight savings). The Kabolt is compatible with all 15QR forks and installs with a 6mm hex tool. Not compatible with 2021 Fox forks.
$1.29
Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C
$10.99 - $45.99
Fox Suspension Fluid is 5wt, 10wt, 20wt and fully synthetic. Green: Used as a bath oil in all Fox Shox forks. It is also the damper oil you will need for all open bath cartridges. Red: Used solely in the older sealed cartridge forks. Gold: Is intended for 'Fit Damper' forks. 5wt Teflon Infused: Grip and Grip2 Damper-Side Bath. Fox Oil Type and Volume Chart https://www.ridefox.com/fox17/help.php?m=bike&id=1106
$32.99 - $45.99
If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.
$99.00 - $101.00
Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2021 Fox 36 in Factory, Performance - Elite
$13.19
Light Cable guide for Fox forks.
$6.60
We all lose those little parts now and then, protect the air spring and make your bike look new Replacement alloy Valve cap from Fox for Fox Float 32 and Fox Float 34 forks.
$172.00 - $176.00
Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2021 Fox 38
$24.99
30mm stanchion wiper Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Compatible with 30mm stanchion tube forks Sold in pairs
$34.00
Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's newest full-sized integrated fender. This optional add-on XL Fork Mud Guard keeps the spray out of your face and adds even more protection for your fork’s stanchions and seals. Designed specifically for 2021 and newer FOX 36 and 38 fork models, and built to give you 85% more coverage than the small, this guard mounts directly onto the fork thanks to a proprietary 4-point direct mount system. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.
$4.29
FOX Float Fluid is the perfect Anti-Friction lube to use while performing Air Sleeve Maintenance Services on ALL FOX rear bicycle shocks. The fluid uses a blend of Fox's own anti-friction additives and Molybdenum to lubricate and protect your seals from abrasive wear and tear. Small 5cc pack is the perfect amount for Fox rear shock services.
$60.00
ARI/Ariete fork seals quality of execution is matched only by the unique nature of the material used--the carboxylated elastomer known as XNBR. This graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant. ARI oil seals have been designed with a variety of lip profiles to make them longer lasting, while reducing friction to a minimum. Because a separating lubricant between the fork tube and the oil seal can reduce friction and increase wear life, ARI includes a packet of ARISIL with each seal kit. This is lube formulated as a rubber/metal lubricant for mechanical components used in the NASA space program.
$60.00
ARI/Ariete fork seals quality of execution is matched only by the unique nature of the material used--the carboxylated elastomer known as XNBR. This graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant. ARI oil seals have been designed with a variety of lip profiles to make them longer lasting, while reducing friction to a minimum. Because a separating lubricant between the fork tube and the oil seal can reduce friction and increase wear life, ARI includes a packet of ARISIL with each seal kit. This is lube formulated as a rubber/metal lubricant for mechanical components used in the NASA space program.
$55.99
Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2019 Fox 36 in Factory, Performance - Elite
$34.99
Compatible with 32mm stanchion forks Specially developed with low friction characteristics Conpanna fork grease recommended for lubrication Designed with dual lip seal for less contamination Automotive grade oil ring for maximum lubrication
$342.99
FOX Service Set: 2017 36 27.5in 180 15x110 QR Fox Matte Black, F-S PE-S, Lower Leg Assy
$45.99
Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2018 Fox 32 in Factory, Performance - Elite For Non Stepcast Forks 26inch and 27.5
$203.00
Need to replace or upgrade your Damper assembly. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. ADJUSTMENTS High-speed compression (w/VVC) 8 clicks Low-speed compression 16 clicks High-speed rebound (w/VVC) 8 clicks Low-speed rebound 16 clicks
$26.99
FOX 34 Float NA2 Rebuild kit
$26.99
FOX 34 Float NA2 Rebuild kit
Page 1 of 2 Next page