Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Protective Gear

Cycling protective gear has become a critical piece of equipment for mountain bikers.  As bike suspension, geometry and our riding has advanced so too have the protective guards that are available today.  Gone are the days of big, bulky and stifling leg armour or cumbersome chest pieces that caused you to sweat and fatigue.  Today's cycling protective gear is lightweight, mobile, minimalist with an added ergonomics that just was not available in the original days of Roach pads.

At The Bike Shop, we offer a large selection of cycling protective gear including shin guards, knee pads, hip protection, arm guards, elbow guards, body armour/chest protection, and spinal protection.  We stock and/or sell the best models from Fox Racing, iXS, Leatt, POC, and Race Face.

Shop us online for the largest selection and with confidence knowing you will be treated to outstanding customer service, free standard ground shipping on orders over $80* plus free returns.  We are Canada's Best Online Bike Shop.

$70.00 - $124.00 $124.00 Up to 44% Off
TERATEC Plus Knee Guards are designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Fully vented Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling
$39.99
Our super-light Kids Transition pads are designed for the little rippers out there that ride scoot or pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.
$99.99
Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)
$109.99
Designed with valuable feedback from the legend himself, the Sam Hill Lite signature elbow pad builds off of our popular Transition elbow pad to be the ultimate ultra-lightweight elbow pad for all types of riding or racing. Light enough to be worn all day long. The Sam Hill Lite elbow pads mold with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. CE Certified Level 1. Compression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great airflow. - Rollable and stash-able using the elastic loop - Durable elbow cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long bicep length fit for no slippage and all-day comfort - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Certified CE/ EN 1621/1 Level 1 - Weight 105G pair (size XL)
$109.99
Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards
$129.99
The Flex Shorts offer protection on the hips, coccyx and thighs. Areas prone to injury or re-injury can now be protected with a compression fit short that flexes to the body's shape in all types of riding. - Flexible curve 1mm flexible side panels for a contoured fit and polygon perforated foam pads on the hips and legs - Rear yolk designed to protect the coccyx - All pads are removable for washing - Double layer polygon foam for increased ventilation and airflow - Jaquard knit elastic waistband and compression fit - Designed beyond CE EN 1621/1 Standards
$139.99
Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)
$189.99
Our most innovative knee pad to date, the project knee is super light, breathable and offers top-level protection. The unique knitted design and CE approved protection gives riders outstanding comfort and confidence. CE Certified Level 2. - Center Strap System allows for even adjustment - Flexible front knee cap increasing durability and protection - Proknit fabric to control elasticity - Thigh-length Proknit main body to prevent pad slipping - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Silicone logo print to assist in gripping liner undershorts silicone tape - Certified CE EN 1621-1:2012 Level 2 - Extra protection around the outside of the knee - Weight 430g pair (size XL)
$145.00
At Chromag we simply want to produce things that the staff want to use, day in, day out, which is why we're very proud to announce the Rift. We saw an opportunity to produce a knee guard that ticked some boxes that we felt were currently left empty, and in partnering with the engineers at RHEON™ Labs, we've managed to create a guard that we're extremely proud of, but most of all, keen to slip on whenever we head out for a ride. The majority of the protection is located up front provided by RHEON™ and encased in an aramid skin to provide resistance to abrasions and tears. Additional lateral foam inserts keep the pad low-profile and allow for unrestricted movement, without bumping the cost sky high. The RHEON™ insert is located on an airprene backing to provide structure, and also moderate temperatures on those all day epics. The calf gusset is designed to keep the pad in place, combined with the generous silicone band around the top, and the upper stretch mesh which allows movement of your leg while keeping everything where it needs to be. The Rift comes in 5 sizes from XS to XL, and is fully machine washable. CE certified EN 1621-1:2012.
$164.99
Design Philosophy: -Protection, it’s in our DNA. An expanded line up of protectors ensures every type of mountain biker is catered for. We work with the best riders to develop our products including the first family of DH, the Athertons and Scottish legend Danny MacAskill. The MT500 Lite knee protectors provide fully certified protection, in lightweight yet durable fabrics for all day pedaling comfort. D3O LP1 Insert: -The LP1 Protector used in the MT500 Lite Knee Pad is the most advanced, breathable protection made by D3O. The highly vented geometry increases the insert's breathability by 45% whilst retaining EN1621-1:2012 level 1 certification. Its lightweight, low-profile design and soft, flexible properties make this an unobtrusive and comfortable high performance protector. Key Benefits: - Highly abrasion resistant impact panels - D3O insert provides lightweight, breathable, shock absorbing protection - Certified to meet CE EN 1621/1 standards - Side PU foam padding provides further impact protection - Jacquard loop system provides secure comfort fit
$29.95
Replacement D3O impact-absorbing inserts. Sold in pairs.
$39.95
Replacement elbow inserts for Enduro D3O Elbow Guard. Sold in pairs.
$59.99 $79.95 25% Off
Lightweight slip-on coverage. - Pedal friendly, lightweight, slip-on knee pads perfect for all-mountain/trail riding - Perforated neoprene on the outside of the leg and stretch material on the back - Multi-fabric construction provides a perfect fit, keeps you cool and dry, and prevents the guards from slipping down mid-ride - Anti-Microbial treatement keeps guards clean and requires less washing - CE certified for Mountain Bike use - 20% Spandex, 20%Polyester, 20%PU Foam, 40% Eva
$84.95
Slip-On Elbow Guards Designed with D3O The Youth Launch D3O Elbow Guard offers an excellent combination of impact-absorbing protection with a value-focused build for smaller riders. The CE certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - D3O inserts - EN1621-1 Level 1 CE certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability
$99.95
Ultralight, Pedal-Friendly MTB Knee Guards The Enduro D3O Knee Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. The moisture-wicking, open mesh design behind the knee improves airflow and helps to reduce overheating hot rides. Features - EN1621-1 Level 1 Knee including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon
$99.95
Slip-On Knee Guards Designed with D3O The Youth Launch D3O Knee Guard offers an excellent combination of impact-absorbing protection with a value-focused build for smaller riders. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - D3O inserts - EN1621-1 Level 1 CE certification - Anatomically-shaped and asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability
$109.95
Minimal restrictions, maximized benefits. - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion resistant elbow panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra
$119.95
Minimal restrictions, maximized benefits - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion-resistant knee panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra
$129.95
Guards against those elbow blows The Enduro Pro Elbow Guards are designed to give you the confidence of maximum protection against sneaky trail blows from branches and more, while minimizing the extra bulk and weight so you can still move freely. Slide them on and rip down the trail, and in no time you’ll be singing the praises of the moisture-wicking micro-Lycra sleeve that breathes easy and keeps you fresh. The custom-molded D3O® elbow insert will take whatever your next run throws at you, so go ‘bows out, flat out, and shred with confidence in the Enduro Pro Elbow Guards. - Designed to offer maximum protection while minimizing bulk and weight - Moisture wicking micro-Lycra sleeve with nylon mesh forearm panel for increased airflow - Custom molded D3O® elbow inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Silicon grip top and bottom to hold the guard in place - D3O® elbow inserts are removable for convenient and quick washing - Elbow inserts are EN1621-1 Level 1
$129.95
Slip-On Knee & Shin Guards Designed with D3O The Launch D3O Knee/Shin Guard offers an excellent combination of full-length impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - CE certified D3O insert for world-leading impact protection - EN1621-1 Level 1 CE Certification - Anatomically-shaped and asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex
$134.95 - $159.95
The Launch Pro D3O Elbow Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these elbow guards utilize D30 - the worldwide leader in impact reducing materials - and combine that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the elbow guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to provide a hard shell-like protection. The Launch Pro D3O Elbow Guards have a breathable, moisture wicking construction, so they remain comfortable all day long. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front cap to reduce snagging - D3O CE certified insert for impact protection
$144.95
Knee guards built to pedal and protect. You want that knee protection, but you don't want to sacrifice mobility and pedal efficiency. The Enduro Pro Knee Guards are designed to deliver maximum 'hard knock' protection while keeping the bulkiness to a minimum. Slip them on and they'll stay right where you put them thanks to the rear elastic strap and silicon grip. Sweat isn't an issue either, thanks to their moisture-wicking material and mesh rear panel to keep the air flowing while you shred. - Designed to offer maximum protection while minimizing bulk and weight - Moisture-wicking micro-Lycra sleeve with nylon mesh rear panel for increased airflow - Custom molded D3O® knee inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Rear elastic strap and silicone grip top and bottom to hold the guard in place - D3O® knee inserts are removable for convenient and quick washing - Knee inserts are EN1621-1 Level 1 - Note: No technology or product can fully prevent the risk of injury or death
$164.95 - $199.95
The Launch Pro D3O Knee Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these knee guards utilize D30 - the worldwide leader in impact reducing materials - and combines that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the knee guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to dissipate the force of the crash. The Launch Pro D3O Knee Guards have a breathable, moisture wicking construction for all day comfort. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior pedal efficiency and on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front knee cap to reduce snagging - D3O CE certified insert for impact protection
$204.95
The Launch Elite Knee Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Bonded Poron pods at the side of the sleeve give additional side knee coverage. Lightweight, and construction in a minimal sleeve-style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Knee Guards.
$234.95
Moisture-Wicking Baselayer with Integrated Back and Hip Guards The Baseframe Pro Sleeveless base layer provides moisture management, cooling, and protection in a single low-profile unit. Designed to be worn under your jersey, it provides EN1621-1 Level 1 back protection. Hip pads provide additional protection. Features - EN1621-1 Level 1 Back including high and low-temperature conditions - CE Certified D3O back insert world-leading impact protection technology - Large perforation and flex grooves in the back foam contours and flexes with rider movement - Body heat activates (softens) the polymer to conform to body - Moisture-wicking, open stretch mesh for breathability - Built-in padding at hips offers additional comfort - D3O back insert is removable for easy washing Construction - 35% PU / 37% nylon / 8% polyester / 20% Eva
$112.99
Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable
$149.99
- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free (Not included on youth) - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Women's short liner has high waist, yoga-style waistband, and longer inseam for a more comfortable fit - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage
$154.99
More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit-strap for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place
$129.99 - $131.99
Engineered for maximum pedal efficiency and comfort. Minimalistic, comfortable, ergonomic fit and uncompromised CE certified impact protection. The ultra lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. The extended leg sock offers great support high on the thigh, relieving pressure from the calf. This knee guard meets all of our design criteria with premium mesh and ventilated materials. The Airflex impact gel pad, fits into a mesh pocket with an abrasion resistant patch over the knee. Once you put these on, you will see what we mean! Has a Leatt protection score of 10 out 25. - Leatt® total protection score of 10 points - New ultralight high-rise sock for improved fit and premium comfort - AirMesh ventilation, and moisture wicking fabric ideal for longer rides and warmer climates. - Super slim and lightweight, AirFlex impact gel protection Pre-curved knee cup design for optimal fit and function - CE tested and certified as impact protection: - Knee EN1621-1 - Single sizing for perfect fit - Silicone printed, non-slip cuffs - All protection materials perforated for superior ventilation - Plastic Free Recyclable Packaging
$299.99
Designed for ultimate comfort and function, this super-slim CE-Certified AirFlex body protector is lightweight and ideal for warmer days—without compromising safety. Featuring Level One back and shoulder protection, as well as a chest pad, the Airflex Stealth Body Tee protector still fits nicely under t-shirt-style jerseys and tops. The ergonomic fit is achieved thanks to high-tech Airflex technology. The vest has a full-length zip for easy fitting and works with or without a Leatt Neck Brace. CE tested and certified as impact protection: - Back EN1621- 2 Level 1 - Shoulder EN1621-1 - AirFlex ventilated soft impact gel - Stealth, super-slim ergonomic design - Full-length compression zip - Superior ventilation using MoistureCool and AirMesh wicking fabrics - Our 3D design ensures a great fit that is very comfortable - BraceOn neck brace fitting system - FFM—French Motorcycle Federation Certified - Easy to clean: hand wash - Weight: from 550g (1.2lbs) - Unisex fit: XS-XXL-154-196cm-5ft-6ft 5"
Page 1 of 2 Next page